SN65LVCP22D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVCP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVCP22 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Throw Configuration | DPDT |
| Data Rate | 1 Gbps |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.087mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 4ns |
| Switch-off Time-Max | 4ns |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVCP22D Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tube.Mounting is performed using Surface Mount.For the analog part of the multiplexers, an IC Crosspoint Switch is used.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Using a 3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 65LVCP series, they can be used in a wide variety of applications.The basic configuration includes 16 terminations.The base part number is 65LVCP22, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 3.3V volts.A component pin count of 16 can be found on this turn signal switch.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.This multiplexer ic has 16 pins configured.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Multiplexer or Switches category.Supply voltages of 3.3V can provide reliable performance of the multiplexers.A total of 2 channels are used for transmission in the turn signal switch's circuit.
SN65LVCP22D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVCP22D Applications
There are a lot of Texas Instruments SN65LVCP22D Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Telephone network
- Make full adder
- Data distribution
- Data demultiplexing
- Data-routing applications
- To select different devices in microprocessor output
- A robotic vehicle with the metal detector
- Steel plants
- Signal router
