SN65LVCP22PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 62.99264mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVCP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVCP22 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Throw Configuration | DPDT |
| Data Rate | 1 Gbps |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.087mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 4ns |
| Switch-off Time-Max | 4ns |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVCP22PW Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Crosspoint Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers from the 65LVCP series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.There is a base part number 65LVCP22 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 3.3V volts.This turn signal switch consists of 16 component pins.GULL WING represents the end of conductors.Its supply type is Single, which is used as the source of power.A configuration of 16 pins is used.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 3V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.In electronic terms, the digital switch ic is classified as part number Multiplexer or Switches.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.There are a total of 2 channels used for transmitting data in the turn signal switch's circuit.
SN65LVCP22PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVCP22PW Applications
There are a lot of Texas Instruments SN65LVCP22PW Signal Switches / Multiplexers / Decoders applications.
- Video transmission
- Time division multiplexing system
- HD surveillance system
- Automatic Monitoring systems
- Paper plants
- Speed control of medern motors
- Relay
- D/A converters
- Recording transmission
- Data transfer
