SN65LVCP22PWR
| Parameters | |
|---|---|
| Independent Circuits | 1 |
| Switch-on Time-Max | 4ns |
| Switch-off Time-Max | 4ns |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 62.99264mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 65LVCP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVCP22 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Data Rate | 1 Gbps |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.087mA |
| Voltage Supply Source | Single Supply |
SN65LVCP22PWR Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Crosspoint Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.As a member of 65LVCP series, the multiplexers can be used for a wide range of applications.The basic configuration includes 16 terminations.You can also find related parts by using its logic switch base part number of 65LVCP22.The multiplexer's system works with 3.3V voltage.This turn signal switch consists of 16 component pins.As the end of conductors, it uses GULL WING.Single is used as its supply type.There are 16 pins on it.Keep Vsup at 3V to avoid unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.The digital switch ic is an electronic part classified into Multiplexer or Switches.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.The turn signal switch's circuit has 2 transmission channels.
SN65LVCP22PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVCP22PWR Applications
There are a lot of Texas Instruments SN65LVCP22PWR Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Image transmission
- Code conversion
- Electronics industry
- Idle motor
- GLAN
- Microprocessor memory systems
- Memory system of computers
- Video transmission
- Electronic circuits
