SN65LVCP23D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVCP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVCP23 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Throw Configuration | DPDT |
| Data Rate | 1.3 Gbps |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.087mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 2.5ns |
| Switch-off Time-Max | 2.5ns |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVCP23D Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tube.Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Crosspoint Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 3V~3.6V, designers have superior flexibility.Several applications are possible for 65LVCP series multiplexers.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 65LVCP23 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 3.3V is supplied.This turn signal switch consists of 16 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.It is configured with 16 pins.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as part number Multiplexer or Switches.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 3.3V.In the turn signal switch's circuit, there are 2 channels used for transmission.
SN65LVCP23D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVCP23D Applications
There are a lot of Texas Instruments SN65LVCP23D Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Data communication
- Solenoid cooling fan
- Recording transmission
- Memory chips
- Idle motor
- Signal router
- Video transmission
- Arithmetic Logic Units
- Electronic circuits
