banner_page

SN65LVCP23PW

16 Terminations3V~3.6V 16 Pin 65LVCP23 Signal switch65LVCP Series 1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN65LVCP23PW
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 561
  • Description: 16 Terminations3V~3.6V 16 Pin 65LVCP23 Signal switch65LVCP Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Weight 62.99264mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 65LVCP
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Crosspoint Switch
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Multiplexer or Switches
Technology BICMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number 65LVCP23
Output SEPARATE OUTPUT
Pin Count 16
Operating Supply Voltage 3.3V
Circuit 1 x 2:2
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Channels 2
Throw Configuration DPDT
Data Rate 1.3 Gbps
Supply Type Single
Supply Current-Max (Isup) 0.087mA
Voltage Supply Source Single Supply
Independent Circuits 1
Switch-on Time-Max 2.5ns
Switch-off Time-Max 2.5ns
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN65LVCP23PW Overview


Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tube.For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Crosspoint Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.In addition to being a member of the 65LVCP series, these multiplexers have a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.In addition, it also has a base part number of 65LVCP23, which can be used to find related parts.The multiplexer's system is powered by 3.3V volts.A component pin count of 16 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.This multiplexer ic is configured with 16 pins.Keeping Vsup at 3V will prevent some unwanted failures.Keeping Vsup at 3.6V will prevent some unnecessary failures.In electronic terms, the digital switch ic is classified as part number Multiplexer or Switches.If the supply voltage is set to 3.3V, reliable performance of the multiplexers can be achieved.Transmission is carried out over 2 channels in the turn signal switch's circuit.

SN65LVCP23PW Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V

SN65LVCP23PW Applications


There are a lot of Texas Instruments SN65LVCP23PW Signal Switches / Multiplexers / Decoders applications.

  • Seven segment displays
  • Microprocessor instruction decoding
  • Injectors
  • Decimal decoder
  • CNC machines
  • Electronic circuits
  • Arithmetic Logic Units
  • Code conversion
  • Frequency multiplexing system
  • Metal detectors

Write a review

Note: HTML is not translated!
    Bad           Good