SN65LVCP23PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 62.99264mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 65LVCP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVCP23 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Data Rate | 1.3 Gbps |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.087mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 2.5ns |
| Switch-off Time-Max | 2.5ns |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVCP23PWR Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.Tape & Reel (TR) is the packaging method.The mounting method digital switch ic uses is Surface Mount.A digital IC Crosspoint Switch is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~3.6V voltage.The multiplexers can be used for a wide range of applications since they are members of 65LVCP series.It is designed with 16 terminations as part of its basic configuration.The base part number is 65LVCP23, so you can find its logic switch related parts using that number.The multiplexer's system works with 3.3V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.As the end of conductors, it uses GULL WING.Single is employed as its supply type.With 16 pins, it is configured.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.Avoid unnecessary failures by keeping Vsup at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Multiplexer or Switches category.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.In the turn signal switch's circuit, there are 2 channels used for transmission.
SN65LVCP23PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVCP23PWR Applications
There are a lot of Texas Instruments SN65LVCP23PWR Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Data communication
- Encrypted communications system
- Recording transmission
- D/A converters
- Code converters
- Enabling different functions units in microprocessor instruction decoding
- Speed synchronization of multiple motors in industries
- Automatic Monitoring systems
- Enabling block of memory depending on address in memory chips
