SN65LVCP23PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 62.99264mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 65LVCP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVCP23 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Data Rate | 1.3 Gbps |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.087mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 2.5ns |
| Switch-off Time-Max | 2.5ns |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVCP23PWRG4 Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC is indicated by Crosspoint Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 3V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers in the 65LVCP series are suitable for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number of 65LVCP23 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 3.3V voltage is supplied.Currently, this turn signal switch has a total of 16 component pins.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.Currently, it is configured with 16 pins.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.Keeping Vsup at 3.6V will prevent some unnecessary failures.The part belongs to the Multiplexer or Switches category of signal switches.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.The turn signal switch's circuit consists of 2 transmission channels.
SN65LVCP23PWRG4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVCP23PWRG4 Applications
There are a lot of Texas Instruments SN65LVCP23PWRG4 Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- RF-based home automation system
- Data distribution
- Implementing boolean functions with multiple variables
- To select different devices in microprocessor input
- Decimal decoder
- Memory system of computers
- Idle motor
- Code conversion
- Code converters
