SN65LVDM050D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 1.11W |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDM050 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 27mA |
| Power Dissipation | 1.11W |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Data Rate | 100Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Duplex | Full |
| Interface Standard | GENERAL PURPOSE |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 2 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDM050D Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-SOIC (0.154, 3.90mm Width) package.Tube package is used for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver uses 3V~3.6V for power supply.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.With a voltage range of 3.3V, this driver IC can operate efficiently.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.It is packaged with 16 pinouts that are market standard for this particular transceiver.With the part number 65LVDM050 identifying the product type, temperature, package, etc., you can search with it to see more variants.16-pin driver IC with improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.It was possible to achieve a 2-bit resolution through this ic receiver.An input voltage supply of 3.3V is required to operate the transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There are 1 transceivers in total implemented by this IC.There are 2 receivers inside.
SN65LVDM050D Features
Tube package
16 pin count
16 pins
SN65LVDM050D Applications
There are a lot of Texas Instruments SN65LVDM050D Drivers/Receivers/Transceivers applications.
- Remote controls
- Single fiber bidirectional application
- Wireless HD Photography
- Satellite communications networks
- Wireless transmission
- Datacom networking applications
- Notebook
- Routers
- VoIP phones
- Ethernet circuitry
