SN65LVDM176D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDM176 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 15mA |
| Power Dissipation | 725mW |
| Output Current | 8mA |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Max Output Voltage | 454mV |
| Data Rate | 400Mbps |
| Differential Output | YES |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Max Input Current | 20μA |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Interface Standard | GENERAL PURPOSE |
| Transmit Delay-Max | 2.7 ns |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 0.05 V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDM176D Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tube package contains this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.This differential driver requires a 3V~3.6V power supply.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.This line driver ic can operate efficiently with a supply voltage range of 3.3V.Wide receiver has 8 terminations built in for driving or receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.As the base part number 65LVDM176 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.The driver IC has improved power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.There is a 3.3V input voltage supply that can be used to operate this transceiver module.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.It is capable of driving LEDs with a voltage of 15mA as the input voltage to this integrating circuit.In this bluetooth transceiver, a 8mA output current is provided as an output.The integrated circuit contains 1 elements to effintegrated circuitiently handle multiple tasks.
SN65LVDM176D Features
Tube package
8 pin count
8 pins
1 elements
SN65LVDM176D Applications
There are a lot of Texas Instruments SN65LVDM176D Drivers/Receivers/Transceivers applications.
- Car alarm systems
- Cell phones
- Copper connection network
- Precision engineering measurement
- Desktop radio
- WDM transmission
- Telecom applications
- Long-distance fiber optic network applications
- Fast Ethernet
- Aircraft navigation
