SN65LVDM179D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDM179 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 15mA |
| Power Dissipation | 635mW |
| Max Supply Current | 15mA |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Data Rate | 100Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Full |
| Interface Standard | GENERAL PURPOSE |
| Transmit Delay-Max | 2.7 ns |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.00002A |
| Number of Receivers | 1 |
| Out Swing-Min | 0.25 V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDM179D Overview
LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tube format.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Surface Mount-type PCB or development board.A differential driver like this uses 3V~3.6V of power.As many as 1/1 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.With a voltage range of 3.3V, this driver IC can operate efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.There are 8 pinouts available on this transceiver which are market standard.The base part number 65LVDM179 identifies the product type, temperature, package, etc., so you can search for more variants by using it.8-pin driver IC with improved power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.An input voltage supply of 3.3V is required to operate the transceiver module.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.In module isolated transceiver are 1 receivers.Input currents above 15mA could lead to mal-functions in this can transceiver.
SN65LVDM179D Features
Tube package
8 pin count
8 pins
SN65LVDM179D Applications
There are a lot of Texas Instruments SN65LVDM179D Drivers/Receivers/Transceivers applications.
- AV receiver
- Long-distance fiber optic network applications
- Wireless network systems
- SONET/SDH Network
- Wireless modems
- Optical sub-assembly (OSA)
- Wireless projection application for conferences
- Wireless showroom
- Cordless telephone
- Shortwave receiver
