SN65LVDM22PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65LVDM22 |
| Output | LVDS |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 x 2:2 |
| Operating Supply Current | 27mA |
| Nominal Supply Current | 27mA |
| Input Characteristics | DIFFERENTIAL |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Interface Standard | EIA-644; TIA-644 |
| Receive Delay-Max | 6 ns |
| Data Rate (Max) | 250Mbps |
| Transmit Delay-Max | 6 ns |
| Delay Time | 4.0ns |
| Capacitance - Input | 3pF |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
SN65LVDM22PWRG4 Overview
For ease of transportation, the power buffer is packaged in 16-TSSOP (0.173, 4.40mm Width).Ready for shipping in Tape & Reel (TR) package.Surface Mount Universal mout to make it easier for you to adjust.In terms of types, this is a typical Buffer, Multiplexer.This op amp buffer uses 3V~3.6V voltage for work.As a result, 1 x 2:2 channels collaborate to maintain output quality.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.It is possible to search with "65LVDM22" to get more pin-to-pin solutions for your special requirements if you are looking for some.On the op amp buffer, you can find 16 terminals.Reflow temperature at its peak is calculated to be NOT SPECIFIED.Supplied by 3.3V voltage, the splitter can accomplish the many demanding tasks.Pinouts of a power buffer start from the 16 pins.In LVDS, it produces output.With 16 pins, it is connected.It is mounted on PCBs or other boards using a Surface Mount.This power buffer operates from a voltage of 27mA.2-Bit receiver is used.Normally, 27mA is the supply current for this splitter.
SN65LVDM22PWRG4 Features
1 x 2:2 channels.
2-Bit receiver.
SN65LVDM22PWRG4 Applications
There are a lot of Texas Instruments SN65LVDM22PWRG4 Signal Buffers, Repeaters, Splitters applications.
- Digital Cross-Connects
- Multidrop Buses
- SATA SSDs or HDDs
- Communications Switchers
- Network Switches/Routers
- Clock Distribution
- Network Switches/Routers
- Industrial/Embedded PC
- DSLAMs
- Protection Switching
