SN65LVDS047D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Driver |
| Max Power Dissipation | 950mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 65LVDS047 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 7mA |
| Power Dissipation | 950mW |
| Propagation Delay | 2.8 ns |
| Turn On Delay Time | 2.8 ns |
| Max Output Voltage | 450mV |
| Data Rate | 400Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 4 |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 4 |
| Out Swing-Min | 0.25 V |
| High Level Input Current-Max | 0.00001A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS047D Overview
LED drivers benefit from this IC's enhanced 16-SOIC (0.154, 3.90mm Width) package.In the Tube package, this receiver is mounted.With its Driver can transceiver design, this part can be incorporated into a wide range of solutions.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver requires a 3V~3.6V power supply.During operation, this electronic part may have up to 4/0 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 3.3V.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.As the base part number 65LVDS047 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 16-pin driver IC with enhanced power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.Using this ic receiver, you were able to achieve a resolution of 4 bits.This transceiver module is designed to operate from an input voltage supply of 3.3V.There are 4 receivers inside.The 65LVDS series is a power-saving integrating circuit that represents an enhanced energy-saving approach.
SN65LVDS047D Features
Tube package
16 pin count
16 pins
65LVDS series
SN65LVDS047D Applications
There are a lot of Texas Instruments SN65LVDS047D Drivers/Receivers/Transceivers applications.
- transmission relay
- Military satellite communications
- Wireless projection application for conferences
- Bar, KTV wireless entertainment
- Satellite radio receiver
- Car alarm systems
- Ethernet circuitry
- Wireless access points
- Aircraft positioning
- Low power, low voltage systems
