SN65LVDS100D
| Parameters | |
|---|---|
| Output Current | 12μA |
| Propagation Delay | 800 ps |
| Supply Current-Max | 0.033mA |
| Turn On Delay Time | 800 ps |
| Max Output Voltage | 454mV |
| Min Input Voltage | -100mV |
| Logic Function | Translator |
| Number of Inputs | 2 |
| Max Input Voltage | 100mV |
| Rise Time | 220ps |
| Input | CML, LVDS, LVPECL |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Data Rate (Max) | 2Gbps |
| Supply Voltage1-Nom | 3.3V |
| Delay Time | 470ps |
| Capacitance - Input | 0.6pF |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 481mW |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDS100 |
| Output | LVDS |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 30mA |
| Power Dissipation | 481mW |
SN65LVDS100D Overview
As a convenience to the user, power buffer has been packaged in 8-SOIC (0.154, 3.90mm Width).Currently, this power buffer is available for shipping in Tube packages.A universal mounting system for easy adaptation.In terms of types, this is a typical Buffer, ReDriver.There is no voltage involved in the operation of this op amp buffer.Input is facilitated by CML, LVDS, LVPECL.To avoid malfunctions, you should set the operating temperature to -40°C~85°C.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "65LVDS100" instead of "s".A 8 terminal can be found on the op amp buffer.Temperature 260 is its peak reflow temperature.3.3V voltage enables the splitter to handle a wide range of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.It outputs the value in z-axis.Pins on its 8 axis are present.The Surface Mount on the board allows it to be mounted on PCBs or other boards.There are other Line Driver or Receivers's in the industry that play a significant role, like the power buffer.In order for this power buffer to operate, a voltage of 30mA must be applied.The operating supply voltage of 3.3V is required for normal operation.Using 1-Bits as the receiver, it transmits data.This splitter dissipates 481mW of power at most.A 1 element interface repeater signal such as this is used.Currently, the spliter should output 12μA.
SN65LVDS100D Features
A standard Line Driver or Receivers.
1-Bit receiver.
SN65LVDS100D Applications
There are a lot of Texas Instruments SN65LVDS100D Signal Buffers, Repeaters, Splitters applications.
- Medical
- Cable Repeaters
- Network Switches/Routers
- Cellular Phone Base Stations
- Clock Distribution
- Protection Switching
- Multidrop Buses
- DSLAMs
- Add/Drop Muxes
- Digital Crossconnects
