SN65LVDS100DGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 377mW |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65LVDS100 |
| Output | LVDS |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 30mA |
| Nominal Supply Current | 25mA |
| Power Dissipation | 377mW |
| Output Current | 12μA |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 800 ps |
| Max Output Voltage | 454mV |
| Logic Function | Translator |
| Number of Inputs | 2 |
| Rise Time | 220ps |
| Input | CML, LVDS, LVPECL |
| Driver Number of Bits | 1 |
| Max Input Current | 66μA |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Data Rate (Max) | 2Gbps |
| Supply Voltage1-Nom | 3.3V |
| Delay Time | 470ps |
| Ambient Temperature Range High | 85°C |
| Capacitance - Input | 0.6pF |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS100DGK Overview
Power buffer is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.A total of Tube packages are available for shipping of power buffer.Surface Mount Universal mout for easy adaptation.This is one of the most common type of Buffer, ReDriver that can be found.The op amp buffer uses 3V~3.6V voltage to operate.It facilitates input from CML, LVDS, LVPECL sources.A temperature setting of -40°C~85°C should be set on the operating system to prevent malfunctions.With "65LVDS100," you will find more pin-to-pin solutions.There are 8 terminals on the op amp buffer.During reflow, it reaches a peak temperature of 260.Powered by 3.3V voltage, the splitter can be used to accomplish a wide variety of demanding tasks.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.As far as output is concerned, it is in LVDS.Pins on its 8 axis are present.The Surface Mount on the board allows it to be mounted on PCBs or other boards.There are other Line Driver or Receivers's in the industry that play a significant role, like the power buffer.In order for this power buffer to operate, a voltage of 30mA must be applied.It is necessary to supply voltage 3.3V for normal operation.The repeter uses a 1-Bit receiver.In the most extreme case, this splitter dissipates 377mW watts.Splitters should be powered by 25mA-volts under normal conditions.An interface repeater signal with 1 elements.The spliter should be producing 12μA as its current output.
SN65LVDS100DGK Features
A standard Line Driver or Receivers.
1-Bit receiver.
SN65LVDS100DGK Applications
There are a lot of Texas Instruments SN65LVDS100DGK Signal Buffers, Repeaters, Splitters applications.
- Network Switches/Routers
- Test Equipment
- Add/Drop Muxes
- Communications Switchers
- Industrial/Embedded PC
- Medical
- PECL-to-LVDS Translation
- Industrial PCs
- SATA SSDs or HDDs
- Multidrop Buses
