SN65LVDS104DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 160.004709mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 950mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 400MHz |
| Base Part Number | 65LVDS104 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 x 1:4 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 35mA |
| Power Dissipation | 950mW |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 4.2 ns |
| Max Output Voltage | 454mV |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Input | LVDS |
| Output Polarity | COMPLEMENTARY |
| Driver Number of Bits | 4 |
| Max Input Current | 20μA |
| Receiver Number of Bits | 1 |
| Data Rate (Max) | 400Mbps |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.00002A |
| Out Swing-Min | 2 V |
| Delay Time | 3.1ns |
| Capacitance - Input | 3pF |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS104DR Overview
This power buffer comes in a convenient 16-SOIC (0.154, 3.90mm Width) package for convenient transportation.A total of Tape & Reel (TR) packages are available for shipping of power buffer.The Surface Mount universal mout has the advantage of being easily adaptable.When it comes to types, this is a typical Buffer, Multiplexer.There is 3V~3.6V voltage used to power this op amp buffer. It works on 3V~3.6V voltage.Keeping output quality high requires the cooperation of 1 x 1:4 channels.There is LVDS input facilitation.A -40°C~85°C operating temperature is recommended to avoid malfunctions.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "65LVDS104".On the op amp buffer, you will find 16 terminals.This material's peak reflow temperature is 260°C.This splitter consists of 3.3V voltage and is able to accomplish a variety of tasks that are splittericularly demanding.Power buffer pinouts begin with 16 pins.The op amp buffers have 16 pins.It has a Surface Mount for mouting on PCB or other boards.There are other Line Driver or Receivers's in the industry that play a significant role, like the power buffer.Voltage 23mA is needed to operate this power buffer.During normal operation, 3.3V operating voltage is required.The repeter uses a 1-Bit receiver.Power dissipation is 950mW at most for this splitter.When using the splitter normaly, the nominal supply current should be 35mA.The system supports 4 outputs in total.
SN65LVDS104DR Features
1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.
SN65LVDS104DR Applications
There are a lot of Texas Instruments SN65LVDS104DR Signal Buffers, Repeaters, Splitters applications.
- Servers
- Cable Repeaters
- PECL-to-LVDS Translation
- Communications Switchers
- Cellular Phone Base Stations
- Clock Distribution
- Protection Switching
- Storage Area Networks
- Portable IPC/HMI
- Digital Cross-Connects
