SN65LVDS104PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 774mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 400MHz |
| Base Part Number | 65LVDS104 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 x 1:4 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 23mA |
| Power Dissipation | 774mW |
| Max Supply Current | 35mA |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 4.2 ns |
| Max Output Voltage | 454mV |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Input | LVDS |
| Output Polarity | COMPLEMENTARY |
| Driver Number of Bits | 4 |
| Max Input Current | 20μA |
| Receiver Number of Bits | 1 |
| Input Current | -20μA |
| Data Rate (Max) | 400Mbps |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.00002A |
| Out Swing-Min | 2 V |
| Delay Time | 3.1ns |
| Capacitance - Input | 3pF |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS104PW Overview
The package is packed in 16-TSSOP (0.173, 4.40mm Width) for convenient transportation of power buffer.Currently available in Tube packages for power buffer.An easy-to-adjust universal mout.On the topic of types, I would like to point out that this is a typical Buffer, Multiplexer.The op amp buffer works at 3V~3.6V voltage.To maintain quality, 1 x 1:4 channels work together.Hence, it facilitates the entry of LVDS into the system.If you want to avoid malfunctions, you need to set the operating temperature to -40°C~85°C.Try search with "65LVDS104" to get more pin-to-pin solutions for your special needs.An op amp buffer with 16 terminals can be found.There is a maximum reflow temperature of 260 for the op amp buffers.The splitter is supplied with 3.3V voltage, so it is capable of completing a wide range of demanding tasks.Power buffer pinouts start from 16 pins.There are 16 pins on the op amp buffers.This board has a Surface Mount hole for mounting on a PCB or other board.Other Line Driver or Receivers like the power buffer play a important role in the industry.There is a voltage of 23mA which is used to power this power buffer.The voltage required for normal operation is 3.3V.Using a 1-Bit receiver, it transmits and receives data.At most, this splitter dissipates 774mW watts of power.For normal use of the splitter, the nominal supply current should be 23mA.The spliter supports a total of 4 outputs.
SN65LVDS104PW Features
1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.
SN65LVDS104PW Applications
There are a lot of Texas Instruments SN65LVDS104PW Signal Buffers, Repeaters, Splitters applications.
- Protection Switching
- Portable IPC/HMI
- Industrial Server
- Digital Cross-Connects
- SATA SSDs or HDDs
- Backplane Interconnect
- DSLAMs
- Servers
- Digital Crossconnects
- Industrial/Embedded PC
