SN65LVDS105PW
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 774mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDS105 |
| Output | LVDS |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 x 1:4 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 23mA |
| Power Dissipation | 774mW |
| Max Supply Current | 35mA |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 4.2 ns |
| Max Output Voltage | 454mV |
| Input | LVTTL |
| Driver Number of Bits | 4 |
| Max Input Current | 20μA |
| Receiver Number of Bits | 1 |
| Receive Delay-Max | 3.5 ns |
| Data Rate (Max) | 400Mbps |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 2 V |
| Delay Time | 2.2ns |
| Capacitance - Input | 3pF |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
SN65LVDS105PW Overview
In order to make transportation as convenient as possible, power buffer is packaged in 16-TSSOP (0.173, 4.40mm Width).Packaged in Tube ready for power buffer.Surface Mount universial mout for easy adapting.When it comes to types, this is a typical Buffer, Multiplexer.For this op amp buffer to function, it requires 3V~3.6V voltage.It is important that the 1 x 1:4 channels cooperate in order to maintain a high level of output.LVTTL inputs can be facilitated by it.If you want to avoid malfunctions, you need to set the operating temperature to -40°C~85°C.You can also search with "65LVDS105" if you want to find more pin-to-pin solutions that meet your special needs.The op amp buffer has 16 terminals that can be found along its length.During reflow, 260 is the peak temperature.When powered by 3.3V voltage, this splitter is capable of carrying out a number of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 16 pins that it has.LVDS is the output unit.Pins on its 16 axis are present.A Surface Mount hole is available for mounting it on a PCB or another board.Other Line Driver or Receivers like the power buffer play a important role in the industry.This power buffer operates from a voltage of 23mA.The operating supply voltage of 3.3V is required for normal operation.The repeter uses a 1-Bit receiver.It dissipates 774mW of power at most.Normal supply current for the splitter is 23mA.In total, it supports 4 outputs.
SN65LVDS105PW Features
1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.
SN65LVDS105PW Applications
There are a lot of Texas Instruments SN65LVDS105PW Signal Buffers, Repeaters, Splitters applications.
- Data or Clock Signal Amplification
- Storage Area Networks
- Cellular Phone Base Stations
- Industrial PCs
- Communications Switchers
- Digital Cross-Connects
- Loopback
- Clock Distribution
- Test Equipment
- Network Switches/Routers
