SN65LVDS105PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 774mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 400MHz |
| Base Part Number | 65LVDS105 |
| Output | LVDS |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 x 1:4 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 23mA |
| Power Dissipation | 774mW |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 4.2 ns |
| Input | LVTTL |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 1 |
| Receive Delay-Max | 3.5 ns |
| Data Rate (Max) | 400Mbps |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 2 V |
| Delay Time | 2.2ns |
| Capacitance - Input | 3pF |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS105PWG4 Overview
Several packaging options are available for convenient transportation, including 16-TSSOP (0.173, 4.40mm Width).Packaged in Tube ready for power buffer.A universal mount that's easy to adapt.Here's a typical Buffer, Multiplexer.The op amp buffer uses a voltage of 3V~3.6V volts for its operation.To maintain quality, 1 x 1:4 channels work together.LVTTL input can be accommodated.In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C.To find more pin-to-pin solutions for your special needs, try searching with the letter "65LVDS105" in the search box.The op amp buffer has 16 terminals.This material's peak reflow temperature is 260°C.The splitter works with a voltage of 3.3V, so it can be used for various demanding tasks.It is important to note that the pinout of the Power buffer starts from the 16 pins that it has.It outputs the value in z-axis.With 16 pins, it is connected.The Surface Mount on the board allows it to be mounted on PCBs or other boards.The power buffer and other Line Driver or Receivers play an important role in the industry.This power buffer operates from a voltage of 23mA.In order to operate normally, you need a voltage of 3.3V.Using 1-Bits as the receiver, it transmits data.Power dissipation of this splitter is at most 774mW watts.Splitters should have a nominal supply current of 23mA for normal operation.The overall number of outputs supported is 4.
SN65LVDS105PWG4 Features
1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.
SN65LVDS105PWG4 Applications
There are a lot of Texas Instruments SN65LVDS105PWG4 Signal Buffers, Repeaters, Splitters applications.
- Storage Area Networks
- Industrial/Embedded PC
- SATA SSDs or HDDs
- Data or Clock Signal Amplification
- Digital Cross-Connects
- DSLAMs
- Digital Crossconnects
- Desktop Computers
- Add/Drop Muxes
- Clock Distribution
