SN65LVDS105PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 950mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 400MHz |
| Base Part Number | 65LVDS105 |
| Output | LVDS |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 x 1:4 |
| Operating Supply Current | 23mA |
| Power Dissipation | 774mW |
| Propagation Delay | 4.2 ns |
| Supply Current-Max | 35mA |
| Turn On Delay Time | 4.2 ns |
| Max Output Voltage | 454mV |
| Input | LVTTL |
| Driver Number of Bits | 4 |
| Max Input Current | 20μA |
| Receiver Number of Bits | 1 |
| Receive Delay-Max | 3.5 ns |
| Data Rate (Max) | 400Mbps |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 2 V |
| Delay Time | 2.2ns |
| Capacitance - Input | 3pF |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS105PWR Overview
Transport is made easy with power buffer packaging in 16-TSSOP (0.173, 4.40mm Width).There are Tape & Reel (TR) packages available for this power buffer, which means it is ready for shipping.The Surface Mount universal mout has the advantage of being easily adaptable.On the topic of types, I would like to point out that this is a typical Buffer, Multiplexer.As a result, the op amp buffer is powered by 3V~3.6V voltage.In order to maintain a high standard of output, 1 x 1:4 channels cooperate together.Input of LVTTL is enabled by it.Setting the operating temperature to -40°C~85°C will prevent malfunctions.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "65LVDS105".There is a 16 terminal on the op amp buffer, which can be seen in the picture below.There is a maximum reflow temperature of 260 for the op amp buffers.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.This Power buffer has a pinout that starts from its 16 pins, which are the first pins on the board.LVDS is the output format.The 16 pins are on it.This board has a Surface Mount hole for mounting on a PCB or other board.A power buffer like the power buffer plays a crucial role in the industry.In order for this power buffer to operate, a voltage of 23mA must be applied.It is necessary to supply voltage 3.3V for normal operation.The receiver is 1-Bit-based.It dissipates 950mW of power at most.The overall number of outputs supported is 4.
SN65LVDS105PWR Features
1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.
SN65LVDS105PWR Applications
There are a lot of Texas Instruments SN65LVDS105PWR Signal Buffers, Repeaters, Splitters applications.
- Data or Clock Signal Amplification
- PECL-to-LVDS Translation
- Loopback
- Laptop Computers (for External Video Cards)
- Digital Cross-Connects
- Cellular Phone Base Stations
- Medical
- Clock Distribution
- Clock Distribution
- Test Equipment
