SN65LVDS105PWRG4
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 400MHz |
| Base Part Number | 65LVDS105 |
| Output | LVDS |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 x 1:4 |
| Operating Supply Current | 23mA |
| Power Dissipation | 774mW |
| Propagation Delay | 4.2 ns |
| Supply Current-Max | 35mA |
| Turn On Delay Time | 4.2 ns |
| Input | LVTTL |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 1 |
| Receive Delay-Max | 3.5 ns |
| Data Rate (Max) | 400Mbps |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 2 V |
| Delay Time | 2.2ns |
| Capacitance - Input | 3pF |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
SN65LVDS105PWRG4 Overview
The power buffer package contains 16-TSSOP (0.173, 4.40mm Width) for ease of transportation.It has been packaged in Tape & Reel (TR) packages and is ready for power buffer.Surface Mount Universal mout to make it easier for you to adjust.In terms of types, this is a typical Buffer, Multiplexer.For this op amp buffer to function, it requires 3V~3.6V voltage.For the output quality to be maintained, 1 x 1:4 channels work together.The system facilitates the input of LVTTL.A temperature setting of -40°C~85°C should be set on the operating system to prevent malfunctions.In order to find more pin-to-pin solutions that suit your specific needs, try searching with "65LVDS105".It is possible to find 16 terminals on the op amp buffer of the assembly.Reflow temperature at its peak is calculated to be 260.Due to the 3.3V voltage supply, this splitter can handle a multitude of demanding tasks.A Power buffer's pinout is determined by the number of pins that it has and starts with 16.Output is expressed in LVDS.16 pins are included in it.A Surface Mount hole allows it to be mounted on a PCB or other board.A power buffer like the power buffer plays a crucial role in the industry.In order for this power buffer to operate, a voltage of 23mA must be applied.During normal operation, 3.3V operating voltage is required.1-Bit receiver is used.In total, there are 4 outputs supported.
SN65LVDS105PWRG4 Features
1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.
SN65LVDS105PWRG4 Applications
There are a lot of Texas Instruments SN65LVDS105PWRG4 Signal Buffers, Repeaters, Splitters applications.
- Medical
- Portable IPC/HMI
- Digital Cross-Connects
- DSLAMs
- Loopback
- Communications Switchers
- Data or Clock Signal Amplification
- Backplane Interconnect
- Industrial Server
- Protection Switching
