SN65LVDS108DBTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 38 |
| Weight | 124.000814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 315MHz |
| Base Part Number | 65LVDS108 |
| Pin Count | 38 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Number of Channels | 1 x 1:8 |
| Operating Supply Current | 85mA |
| Power Dissipation | 1.277kW |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Input | LVDS |
| Output Polarity | TRUE |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644; TIA-644 |
| Number of Drivers | 8 |
| Data Rate (Max) | 400Mbps |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.00002A |
| Delay Time | 2.8ns |
| Capacitance - Input | 5pF |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS108DBTRG4 Overview
Several packaging options are available for convenient transportation, including 38-TFSOP (0.173, 4.40mm Width).Currently available in Tape & Reel (TR) packages for power buffer.An easy-to-adapt universal mount.On the topic of types, I would like to point out that this is a typical Buffer, Multiplexer.As far as the voltage is concerned, this op amp buffer uses 3V~3.6V volts.In order to maintain a high standard of output, 1 x 1:8 channels cooperate together.There is no input provided by it.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "65LVDS108" instead of "s".There are 38 terminals on the op amp buffer.The peak reflow temperature of the power buffer is 260.With its 3.3V voltage supply, the splitter can perform many demanding functions that are expected from it.A Power buffer's pinout begins with its 38 pins.The op amp buffers have 38 pins.A Surface Mount hole allows it to be mounted on a PCB or other board.In the industry, other Line Driver or Receiverss play an important role, such as the power buffer.A voltage of 85mA is required to operate this power buffer.It is necessary to supply voltage 3.3V for normal operation.It utilizes a 1-Bit receiver.1 elements are used to interface with this repeater signal.8 drivers are incorporated into the video signal spliter.
SN65LVDS108DBTRG4 Features
1 x 1:8 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
SN65LVDS108DBTRG4 Applications
There are a lot of Texas Instruments SN65LVDS108DBTRG4 Signal Buffers, Repeaters, Splitters applications.
- Cable Repeaters
- Storage Area Networks
- Laptop Computers (for External Video Cards)
- Clock Distribution
- Desktop Computers
- Loopback
- Digital Cross-Connects
- Network Switches/Routers
- Medical
- Protection Switching
