SN65LVDS122PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 62.99264mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDS122 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Throw Configuration | DPDT |
| Data Rate | 1.5 Gbps |
| Output Characteristics | DIFFERENTIAL |
| Supply Type | Single |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Receive Delay-Max | 0.9 ns |
| Transmit Delay-Max | 0.9 ns |
| Supply Voltage1-Nom | 3.3V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS122PW Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tube method.In terms of mounting, digital switch ic uses the method of Surface Mount.As the analog part, the circuit uses an analog IC Crosspoint Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 3V~3.6V.provides digital controlled switch's digital controlled switch'sMultiplexers from the 65LVDS series can be used in a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 65LVDS122, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 3.3V volts.A component pin count of 16 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.In this case, Single is employed as the supply type.It is configured with 16 pins.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.
SN65LVDS122PW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVDS122PW Applications
There are a lot of Texas Instruments SN65LVDS122PW Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Electronics industry
- Frequency multiplexing system
- Data collection system
- GLAN
- Data-routing applications
- Memory chips
- Code conversion
- PCIe
- Encrypted communications system
