SN65LVDS125ADBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 38 |
| Weight | 124.000814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 65LVDS125 |
| Output | SEPARATE OUTPUT |
| Pin Count | 38 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 4:4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Data Rate | 1.5 Gbps |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 6ns |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS125ADBT Overview
Due to the fact that it is provided in the 38-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.It is packaged according to the Tube method.Digital switch ic uses a Surface Mount mounting method.A digital IC Crosspoint Switch is used as the analog component of the multiplexers.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~3.6V voltage.Since they are members of the 65LVDS series, they can be used in a wide variety of applications.Among its basic configurations are 38 terminations.As its base part number is 65LVDS125, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 3.3V volts.This turn signal switch contains 38 component pins.GULL WING represents the end of conductors.In this case, Single is employed as the supply type.There are 38 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 3.6V.This is an the digital switch ic that is classified as Multiplexer or Switches.Using a supply voltage of 3.3V can result in reliable performance of the multiplexers.This turn signal switch's circuit is based on a circuit with 4 channels.
SN65LVDS125ADBT Features
Supplied in the 38-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVDS125ADBT Applications
There are a lot of Texas Instruments SN65LVDS125ADBT Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Microprocessor input/output systems
- Solenoid cooling fan
- HD surveillance system
- Automation system
- High-performance memory systems
- GLAN
- Transmission from the computer system of a satellite
- Make half adder
- Small scale TV wall
