SN65LVDS125ADBTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 38 |
| Weight | 124.000814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 38 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 65LVDS125 |
| Output | SEPARATE OUTPUT |
| Pin Count | 38 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 4:4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Data Rate | 1.5 Gbps |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 6ns |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS125ADBTRG4 Overview
Due to the fact that it is provided in the 38-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Crosspoint Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 3V~3.6V, designers are provided with a greater degree of flexibility.As a member of 65LVDS series, the multiplexers can be used for a wide range of applications.The basic configuration includes 38 terminations.The base part number is 65LVDS125, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 3.3V volts.Currently, this turn signal switch has a total of 38 component pins.It is the end of conductors that is represented by GULL WING.In this case, Single is employed as the supply type.This multiplexer ic is configured with 38 pins.Surface Mount is the way it is mounted.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Multiplexer or Switches category.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.A total of 4 channels are used for transmission in the turn signal switch's circuit.
SN65LVDS125ADBTRG4 Features
Supplied in the 38-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVDS125ADBTRG4 Applications
There are a lot of Texas Instruments SN65LVDS125ADBTRG4 Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Memory system of computers
- GLAN
- Make half adder
- High-performance memory systems
- Medium scale TV wall
- Injectors
- To select different devices in microprocessor output
- Encrypted communications system
- LVDS
