SN65LVDS179DGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 19.986414mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 424mW |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65LVDS179 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 12mA |
| Power Dissipation | 424mW |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 2.7 ns |
| Max Output Voltage | 454mV |
| Logic Function | Receiver, Transceiver |
| Data Rate | 150Mbps |
| Differential Output | YES |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Max Input Current | 20μA |
| Duplex | Full |
| Interface Standard | EIA-644; TIA-644 |
| Receive Delay-Max | 4.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.00002A |
| Number of Receivers | 1 |
| Out Swing-Min | 0.247 V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS179DGK Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The receiver is packaged in a Tube package.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver consumes 3V~3.6V for its power supplyAt any one time, this electronic part can have up to 1/1 eligible receivers/drivers.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 3.3V can operate efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.A package consisting of 8 market standard pinouts is provided with this integrated circuit.For more variants of this part, try searching with the base part number 65LVDS179, which indicates the product type, temperature, package, etc.An enhanced power dissipation control is provided by this 8-pin driver IC.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 3.3V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.The box contains 1 receivers.Input voltage is set to a value of 12mA, and this integrating circuit is capable of driving LEDs with that voltage.This line driver integrating circuit represents a power-saving technique that is part of the 65LVDS series.
SN65LVDS179DGK Features
Tube package
8 pin count
8 pins
65LVDS series
SN65LVDS179DGK Applications
There are a lot of Texas Instruments SN65LVDS179DGK Drivers/Receivers/Transceivers applications.
- Automation systems
- High-speed computer links
- Precision engineering measurement
- Notebook
- Fiber-to-the-desktop
- IPTV front end
- Wireless 3D game
- SONET/SDH Network
- Wireless teaching
- Bridges
