SN65LVDS20DRFRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | LVDS |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 2.375V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65LVDS20 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Number of Channels | 1 |
| Nominal Supply Current | 45mA |
| Number of Bits | 1 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 630 ps |
| Current - Supply | 35mA |
| Logic Function | Buffer |
| Input | Differential |
| Output Polarity | COMPLEMENTARY |
| Data Rate (Max) | 4Gbps |
| Output Latch or Register | NONE |
| Delay-Max | 0.63 ns |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS20DRFRG4 Overview
A convenient transportation package of power buffer is provided in 8-WFDFN Exposed Pad.Power buffer ready in Tape & Reel (TR) packages.Surface Mount universial mout for easy adapting.This is one of the most common type of Buffer, ReDriver that can be found.The op amp buffer uses a voltage of 2.375V~3.6V volts for its operation.In order to maintain a high standard of output, 1 channels cooperate together.As a result, there is a Differential input that is enabled.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.The objective of this operational amplifier buffer is to serve applications in the LVDS domain and other areas as well.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "65LVDS20".There is a 8 terminal on the op amp buffer, which can be seen in the picture below.During reflow, the peak temperature of the material is determined by the number 260.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 2.5V voltage.Pinouts of a power buffer start from the 8 pins.There are 8 pins on the op amp buffers.In this case, they are 35mA op amp buffers.The power buffer and other Line Driver or Receivers play an important role in the industry.In order to run the repeters, two 2.5/3.3V power supplies are sufficient.A nominal supply current of 45mA is recommended for normal operation of the splitter.
SN65LVDS20DRFRG4 Features
1 channels.
Mainly used in LVDS.
A standard Line Driver or Receivers.
SN65LVDS20DRFRG4 Applications
There are a lot of Texas Instruments SN65LVDS20DRFRG4 Signal Buffers, Repeaters, Splitters applications.
- Digital Crossconnects
- Storage Area Networks
- Communications Switchers
- Cellular Phone Base Stations
- Industrial/Embedded PC
- DSLAMs
- Backplane Interconnect
- Servers
- Multidrop Buses
- Loopback
