SN65LVDS250DBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 38 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 65LVDS250 |
| Output | SEPARATE OUTPUT |
| Pin Count | 38 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 4:4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Data Rate | 2.5 Gbps |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 6ns |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS250DBT Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 38-TFSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Crosspoint Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.Several applications are possible for 65LVDS series multiplexers.This configuration includes 38 terminations as part of its basic functionality.In addition, it also has a base part number of 65LVDS250, which can be used to find related parts.For multiplexer's system, 3.3V voltage is supplied.This turn signal switch consists of 38 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.With 38 pins, it is configured.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.Multiplexer or Switches is a category for the digital switch ics.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
SN65LVDS250DBT Features
Supplied in the 38-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVDS250DBT Applications
There are a lot of Texas Instruments SN65LVDS250DBT Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Enabling different rows of memory depending on address in memory chips
- Home automation system
- Data distribution
- Data demultiplexing
- Enabling block of memory depending on address in memory chips
- Audio transmission
- Image transmission
- Electronics industry
- Microprocessor input/output systems
