SN65LVDS2DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Receiver |
| Max Power Dissipation | 725mW |
| Technology | TTL |
| Voltage - Supply | 2.4V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDS2 |
| Pin Count | 5 |
| Max Output Current | 10mA |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 5.5mA |
| Power Dissipation | 385mW |
| Propagation Delay | 3.1 ns |
| Turn On Delay Time | 3.1 ns |
| Max Output Voltage | 454mV |
| Data Rate | 400Mbps |
| Differential Output | NO |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/1 |
| Driver Number of Bits | 1 |
| Max Input Current | 20μA |
| Interface Standard | EIA-644-A; TIA-644-A |
| Receive Delay-Max | 3.6 ns |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 1 |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.00002A |
| Ambient Temperature Range High | 85°C |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS2DBVR Overview
LED drivers with the enhanced SC-74A, SOT-753 package will be able to drive a variety of common LEDs with ease.The Tape & Reel (TR) package contains this receiver.The Receiver can transceiver type enables this part to be used in a wide range of applications.You can place this wide receiver to any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 2.4V~3.6V.It is possible to have up to 0/1 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.3.3V is the supply voltage range that this line driver ic can efficiently operate with.For driving and receiving signals from data, this wide receiver has 5 terminations integrated.There are 5 pinouts available on this transceiver which are market standard.As the base part number 65LVDS2 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.5-pin driver chip with enhanced power dissipation.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There is a supply voltage of 3.3V on the input of this transceiver module, so it can be operated from that source.There are 1 receivers inside.Input voltage is set to a value of 8mA, and this integrating circuit is capable of driving LEDs with that voltage.Integrating circuits from the 65LVDS series are power-saving integrating circuits.
SN65LVDS2DBVR Features
Tape & Reel (TR) package
5 pin count
5 pins
65LVDS series
SN65LVDS2DBVR Applications
There are a lot of Texas Instruments SN65LVDS2DBVR Drivers/Receivers/Transceivers applications.
- Portable radio
- Vehicle
- Televisions
- Cell phones
- Fast Ethernet
- Low power, low voltage systems
- interconnection between computers
- transmission relay
- Radio transmission
- LAN, SAN, WAN (local, storage, work area networks)
