banner_page

SN65LVDS33D

16 Terminations3.3V 16 Pin 65LVDS33 Receivers0/4 Drivers/Receivers4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN65LVDS33D
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 688
  • Description: 16 Terminations3.3V 16 Pin 65LVDS33 Receivers0/4 Drivers/Receivers4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 139.989945mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 65LVDS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Receiver
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 725mW
Technology BICMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3.3V
Base Part Number 65LVDS33
Pin Count 16
Operating Supply Voltage 3.3V
Nominal Supply Current 23mA
Power Dissipation 725mW
Max Supply Current 23mA
Propagation Delay 9 ns
Turn On Delay Time 9 ns
Data Rate 400Mbps
Output Characteristics TOTEM-POLE
Differential Output NO
Output Polarity TRUE
Protocol LVDS
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 0/4
Receiver Hysteresis 50mV
Interface Standard EIA-644; TIA-644
Input Current 23mA
Receive Delay-Max 6 ns
Supply Voltage1-Nom 3.3V
Output Low Current-Max 0.004A
Number of Receivers 2
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN65LVDS33D Overview


Driver ICs with enhanced 16-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.This receiver is mounted in the Tube package.It has proved to be a valuable component for a variety of applications since it is a Receiver can transceiver.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 3V~3.6V.At any given time, there can be up to 0/4 eligible receivers/drivers for this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.This integrated circuit has 16 terminations designed for driving and receiving signals from data.In this package, you will find 16 market-standard pinouts for this transceiver.As the base part number 65LVDS33 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control is provided by this 16-pin driver IC.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.This rf transceiver module can have?up to 2 eligible receivers on the field at once.?can transceivers with an input current greater than 23mA may have malfunctions.A power-saving technique is used in this integrating circuit, whintegrating circuith belongs to the 65LVDS series.

SN65LVDS33D Features


Tube package
16 pin count
16 pins
65LVDS series

SN65LVDS33D Applications


There are a lot of Texas Instruments SN65LVDS33D Drivers/Receivers/Transceivers applications.

  • Wireless HD Photography
  • Transmission stations
  • Desktop PC
  • Broadcast application
  • Aircraft positioning
  • LAN, SAN, WAN (local, storage, work area networks)
  • Car alarm systems
  • Satellite communications networks
  • Clock radio
  • Military satellite communications

Write a review

Note: HTML is not translated!
    Bad           Good