SN65LVDS34D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Max Power Dissipation | 950mW |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 65LVDS34 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 12mA |
| Power Dissipation | 950mW |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 9 ns |
| Data Rate | 400Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/2 |
| Max Input Current | 75μA |
| Receiver Hysteresis | 50mV |
| Receive Delay-Max | 6 ns |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 4 |
| High Level Input Current-Max | 0.00001A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS34D Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tube package contains this receiver.As a Receiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.A differential driver like this uses 3V~3.6V of power.At any one time, this electronic part can have up to 0/2 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.This wide receiver has 8 terminations for driving and receiving data signals.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.With the part number 65LVDS34 identifying the product type, temperature, package, etc., you can search with it to see more variants.A 8-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.The module isolated transceivers are 4 receivers.An input voltage of 12mA is recommended for this integrating circuit to be able to drive LEDs.This line driver integrating circuit represents a power-saving technique that is part of the 65LVDS series.
SN65LVDS34D Features
Tube package
8 pin count
8 pins
65LVDS series
SN65LVDS34D Applications
There are a lot of Texas Instruments SN65LVDS34D Drivers/Receivers/Transceivers applications.
- Wireless transmission
- Car alarm systems
- TV signal transmission
- Precision geodetic measurement
- Metro access rings
- Broadcast application
- Wireless showroom
- Single fiber bidirectional application
- Low power, low voltage systems
- Home theater wiring-free
