SN65LVDS391D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Driver |
| Max Power Dissipation | 774mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 65LVDS391 |
| Pin Count | 16 |
| Max Output Current | 24mA |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 26mA |
| Nominal Supply Current | 20mA |
| Power Dissipation | 950mW |
| Max Supply Current | 20mA |
| Propagation Delay | 2.9 ns |
| Turn On Delay Time | 2.9 ns |
| Max Output Voltage | 454mV |
| Data Rate | 630Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 4 |
| Max Input Current | 20μA |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 4 |
| High Level Input Current-Max | 0.00002A |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDS391D Overview
With the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.Since this is a Driver can transceiver, many solutions can use it for a variety of functions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 3V~3.6V.During operation, this electronic part may have up to 4/0 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.This transceiver is packaged with 16 market standard pinoutsFor more variants of this part, try searching with the base part number 65LVDS391, which indicates the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 16-pin.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a capability of 4-bit resolution with this ic receiver.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 3.3V.In addition to that, it contains 4 receivers as well.Using the input voltage of 26mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.In the event that the input current reaches or exceeds 20mA, the can transceiver may malfunction.One of the integrating circuits in the 65LVDS series represents a technique for enhancing power effintegrating circuitiency.
SN65LVDS391D Features
Tube package
16 pin count
16 pins
65LVDS series
SN65LVDS391D Applications
There are a lot of Texas Instruments SN65LVDS391D Drivers/Receivers/Transceivers applications.
- Satellite communication
- Transmission stations
- Carrier phase observations
- Portable radio
- Wireless network systems
- Aircraft positioning
- LAN, SAN, WAN (local, storage, work area networks)
- Wireless access points
- Pocket PC
- AV receiver
