SN65LVDT100DGKR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 377mW |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65LVDT100 |
| Output | LVDS |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 30mA |
| Power Dissipation | 377mW |
| Output Current | 12μA |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 800 ps |
| Logic Function | Translator |
| Input | CML, LVDS, LVPECL |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Data Rate (Max) | 2Gbps |
| Supply Voltage1-Nom | 3.3V |
| Delay Time | 470ps |
| Capacitance - Input | 0.6pF |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
SN65LVDT100DGKR Overview
There is a package of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for easy transportation of this power buffer.There are Tape & Reel (TR) packages available for this power buffer, which means it is ready for shipping.The Surface Mount universal mout allows for easy adaptability to a variety of situations.It is a typical Buffer, ReDriver type, if we are talking about types.During the operation of this op amp buffer, 3V~3.6V voltage is used.CML, LVDS, LVPECL inputs can be facilitated by it.It is recommended that the operating temperature be set to -40°C~85°C in order to prevent any malfunctions.You can get more pin-to-pin solutions for your specific needs by searching with "65LVDT100".An op amp buffer with 8 terminals can be found on the left side of the op amp buffer.It reaches its peak reflow temperature at 260 degrees Celsius.The splitter is supplied with 3.3V voltage, so it is capable of completing a wide range of demanding tasks.From the power buffer's 8 pins, we can determine its pinout.In LVDS, it produces output.8 pins are present on the op amp buffers.A Surface Mount hole allows it to be mounted on a PCB or other board.The power buffer and other Line Driver or Receivers play an important role in the industry.There is a voltage of 30mA which is used to power this power buffer.It is necessary to provide 3.3V operating supply voltage for normal operation.The repeter uses a 1-Bit receiver.This splitter dissipates 377mW of power at most.The repeater signal is a 1 element interface.Current output from the spliter should be 12μA.
SN65LVDT100DGKR Features
A standard Line Driver or Receivers.
1-Bit receiver.
SN65LVDT100DGKR Applications
There are a lot of Texas Instruments SN65LVDT100DGKR Signal Buffers, Repeaters, Splitters applications.
- Add/Drop Muxes
- Backplane Interconnect
- Loopback
- Protection Switching
- Data or Clock Signal Amplification
- Cellular Phone Base Stations
- Industrial Server
- Digital Cross-Connects
- PECL-to-LVDS Translation
- Clock Distribution
