SN65LVDT101DGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 377mW |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 65LVDT101 |
| Output | LVPECL |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 61mA |
| Power Dissipation | 377mW |
| Output Current | 12μA |
| Propagation Delay | 900 ps |
| Turn On Delay Time | 900 ps |
| Logic Function | Translator |
| Number of Inputs | 2 |
| Input | CML, LVDS, LVPECL |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Receive Delay-Max | 0.9 ns |
| Data Rate (Max) | 2Gbps |
| Transmit Delay-Max | 0.9 ns |
| Supply Voltage1-Nom | 3.3V |
| Delay Time | 630ps |
| Capacitance - Input | 0.6pF |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDT101DGK Overview
Designed for convenient transportation, power buffer comes packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).A total of Tube packages are available for shipping of power buffer.Surface Mount Universal mout to make it easier for you to adjust.A Buffer, ReDriver is a typical type.To operate this op amp buffer, it requires a voltage of 3V~3.6V volts.It facilitates input from CML, LVDS, LVPECL sources.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.There are more pin-to-pin solutions available for your special needs if you search with the letter "65LVDT101".The op amp buffer has 8 terminals.Its peak reflow temperature is 260 when it is being reflowed.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.Power buffer pinout starts at 8 pins.Depending on the input, it will output in LVPECL.There are 8 pins on the op amp buffers.It has a Surface Mount for mouting on PCB or other boards.A power buffer like the power buffer plays a crucial role in the industry.A voltage of 61mA is required to operate this power buffer.For normal operation, 3.3V voltage is required.Receiver uses 1-Bit technology.It dissipates 377mW of power at most.1 elements are used to interface with this repeater signal.Currently, the spliter should output 12μA.
SN65LVDT101DGK Features
A standard Line Driver or Receivers.
1-Bit receiver.
SN65LVDT101DGK Applications
There are a lot of Texas Instruments SN65LVDT101DGK Signal Buffers, Repeaters, Splitters applications.
- Cable Repeaters
- Digital Cross-Connects
- Backplane Interconnect
- Network Switches/Routers
- Protection Switching
- Servers
- Portable IPC/HMI
- Medical
- SATA SSDs or HDDs
- Clock Distribution
