SN65LVDT122D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDT122 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Throw Configuration | DPDT |
| Data Rate | 1.5 Gbps |
| Output Characteristics | DIFFERENTIAL |
| Supply Type | Single |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Receive Delay-Max | 0.9 ns |
| Transmit Delay-Max | 0.9 ns |
| Supply Voltage1-Nom | 3.3V |
| High Level Input Current-Max | 0.000002A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDT122D Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tube.Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Crosspoint Switch as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of 3V~3.6V provides digital controlled switch's superior flexibility for designers.With the 65LVDT series, the multiplexers are suitable for a diverse range of applications.It is designed with 16 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 65LVDT122 may also be used.The turn signal switch is supplied with a voltage of 3.3V volts.A component pin count of 16 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.There are 16 pins on it.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.
SN65LVDT122D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVDT122D Applications
There are a lot of Texas Instruments SN65LVDT122D Signal Switches / Multiplexers / Decoders applications.
- Relay
- Small scale TV wall
- Speed control of medern motors
- Electronics industry
- Data communication
- Time division multiplexing system
- Data-routing applications
- Idle motor
- Medical industry
- Medium scale TV wall
