SN65LVDT125ADBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 38 |
| Weight | 124.000814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 65LVDT125 |
| Output | SEPARATE OUTPUT |
| Pin Count | 38 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 4:4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Data Rate | 1.5 Gbps |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 6ns |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDT125ADBT Overview
Due to the lack of space on the board, digital switch is provided in the 38-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tube.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC Crosspoint Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 3V~3.6V, designers have superior flexibility.Multiplexers from the 65LVDT series can be used in a wide range of applications.As part of its basic configuration, 38 terminations are designed as a part of it.The part number for 65LVDT125 can be used to find its logic switch related parts as well.The multiplexer is supplied with 3.3V voltage.In this turn signal switch, there are 38 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.A configuration of 38 pins is used.As you can see, it is mounted in the direction of Surface Mount.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Multiplexer or Switches is a category for the digital switch ics.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.This turn signal switch's circuit is based on a circuit with 4 channels.
SN65LVDT125ADBT Features
Supplied in the 38-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
SN65LVDT125ADBT Applications
There are a lot of Texas Instruments SN65LVDT125ADBT Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Make half adder
- Idle motor
- Memory system of computers
- Combinational circuit
- Data demultiplexing
- Electronics industry
- Time division multiplexing system
- Microprocessor input/output systems
- Encrypted communications system
