SN65LVDT34D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 80.002354mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 950mW |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDT34 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 12mA |
| Power Dissipation | 950mW |
| Max Supply Current | 12mA |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 9 ns |
| Data Rate | 400Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/2 |
| Receiver Hysteresis | 50mV |
| Number of Drivers | 4 |
| ESD Protection | Yes |
| Receive Delay-Max | 6 ns |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 2 |
| High Level Input Current-Max | 0.00001A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDT34D Overview
Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.The receiver is packaged in a Tube package.This Receiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.The wide receiver can be mounted on any Surface Mount-type PCB or development board.A differential driver like this uses 3V~3.6V of power.There can be up to 0/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.Wide receiver can operate within the range of 3.3V supply voltages efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.Since the base part number 65LVDT34 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.An input voltage supply of 3.3V is required to operate the transceiver module.The box contains 2 receivers.The part is embedded with 4 drivers, so it can be used with 4 devices.Input currents above 12mA could lead to mal-functions in this can transceiver.One of the 65LVDT series, representing an enhanced power-saving method, is this integrating circuit.
SN65LVDT34D Features
Tube package
8 pin count
8 pins
65LVDT series
SN65LVDT34D Applications
There are a lot of Texas Instruments SN65LVDT34D Drivers/Receivers/Transceivers applications.
- Routers
- Gigabit Ethernet
- Carrier phase observations
- Fiber optic cable connection network
- IPTV front end
- Military satellite communications
- Wireless multimedia center in smart home
- Mainframes, workstations or storage devices
- Aircraft positioning
- AV receiver
