SN65LVDT390PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.99264mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 65LVDT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Max Power Dissipation | 950mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 65LVDT390 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 18mA |
| Nominal Supply Current | 18mA |
| Power Dissipation | 774mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 4 ns |
| Data Rate | 200Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | LVDS |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/4 |
| Max Input Current | 40μA |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.008A |
| Number of Receivers | 4 |
| High Level Input Current-Max | 0.00001A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVDT390PW Overview
Due to the enhanced 16-TSSOP (0.173, 4.40mm Width) package, this driver IC is excellent for driving common LEDs.In this package, the receiver is mounted in the Tube format.Since this part is a Receiver can transceiver, a number of solutions have been able to utiliReceivere it for various purposes.Any Surface Mount-type PCB or development board can be used with this wide receiver.With respect to the power supply, this differential driver uses 3V~3.6V.There can be up to 0/4 eligible receivers/drivers on the field at the same time with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.Wide receiver has 16 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.The base part number 65LVDT390 identifies the product type, temperature, package, etc., so you can search for more variants by using it.16-pin driver chip with enhanced power dissipation.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.This rf transceiver module can have?up to 4 eligible receivers on the field at once.?With this integrating circuit you can drive LEDs of a voltage of up to 18mA. It can be used to drive large displays.An integrating circuit in the 65LVDT series represents an enhanced power-saving feature.
SN65LVDT390PW Features
Tube package
16 pin count
16 pins
65LVDT series
SN65LVDT390PW Applications
There are a lot of Texas Instruments SN65LVDT390PW Drivers/Receivers/Transceivers applications.
- Ethernet circuitry
- Car radio
- Radio transmission
- Wireless transmission
- Home theater wiring-free
- Data center
- Wireless multimedia center in smart home
- Fiber optic cable connection network
- Cable network front end
- Sensor reporting
