SN65LVP17DRFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Buffer, ReDriver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IT ALSO OPERATES AT 3.3 V SUPPLY |
| Subcategory | Other Interface ICs |
| Max Power Dissipation | 161mW |
| Technology | BICMOS |
| Voltage - Supply | 2.375V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 65LVP17 |
| Output | LVPECL |
| Pin Count | 8 |
| Power Supplies | 2.5/3.3V |
| Operating Supply Current | 48mA |
| Nominal Supply Current | 40mA |
| Output Current | 400μA |
| Number of Bits | 1 |
| Propagation Delay | 340 ps |
| Logic Function | Buffer |
| Input | PECL |
| Data Rate (Max) | 4Gbps |
| Number of Receivers | 1 |
| Delay Time | 460ps |
| Delay-Max | 0.63 ns |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65LVP17DRFT Overview
The package is packed in 8-WFDFN Exposed Pad for convenient transportation of power buffer.In Tape & Reel (TR) packages, ready for power buffer.A universal mount that's easy to adapt.On the topic of types, I would like to point out that this is a typical Buffer, ReDriver.This op amp buffer uses 2.375V~3.6V voltage for work.PECL input can be accommodated.A -40°C~85°C operating temperature is recommended to avoid malfunctions.Get more pin-to-pin solutions by searching with "65LVP17".8 terminals are on the op amp buffer.The peak reflow temperature is 260.The splitter works with a voltage of 2.5V, so it can be used for various demanding tasks.From the power buffer's 8 pins, we can determine its pinout.LVPECL capacitance for the input.It is equipped with 8 pins.It has a Surface Mount for mouting on PCB or other boards.The power buffer and other Other Interface ICs play an important role in the industry.48mA is the voltage that this power buffer operates on.There are enough 2.5/3.3V power supplies to power the repeters.It dissipates a maximum of 161mW watts of power.A nominal supply current of 40mA is recommended for normal operation of the splitter.It implements 1 receivers.The spliter should be producing 400μA as its current output.Repeter and IT ALSO OPERATES AT 3.3 V SUPPLY specialize in specifrepeter areas.
SN65LVP17DRFT Features
A standard Other Interface ICs.
IT ALSO OPERATES AT 3.3 V SUPPLY.
SN65LVP17DRFT Applications
There are a lot of Texas Instruments SN65LVP17DRFT Signal Buffers, Repeaters, Splitters applications.
- Cellular Phone Base Stations
- Loopback
- Backplane Interconnect
- Digital Cross-Connects
- Digital Crossconnects
- Clock Distribution
- Laptop Computers (for External Video Cards)
- Test Equipment
- Protection Switching
- Clock Distribution
