SN65MLVD201D
| Parameters | |
|---|---|
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS, Multipoint |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 25mV |
| ESD Protection | Yes |
| Input Current | 24mA |
| Transmit Delay-Max | 2.4 ns |
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65MLVD201 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 24mA |
| Nominal Supply Current | 24mA |
| Power Dissipation | 725mW |
| Max Supply Current | 24mA |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Data Rate | 200Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
SN65MLVD201D Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.Tube package is used for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver requires a 3V~3.6V power supply.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.This integrated circuit has 8 terminations designed for driving and receiving signals from data.There are 8 pinouts available on this transceiver which are market standard.You can search with 65MLVD201 to get more variants of this part, since it identifies the product type, temperature, package, etc.8-pin driver chip with enhanced power dissipation.It provided a 1-bit resolution capability with this ic receiver.There is a supply voltage of 3.3V on the input of this transceiver module, so it can be operated from that source.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.Additionally, there are 1 receivers included in the package.Input voltage is set to a value of 24mA, and this integrating circuit is capable of driving LEDs with that voltage.A can transceiver that has a current input of 24mA or greater may be affected by malfunctions.
SN65MLVD201D Features
Tube package
8 pin count
8 pins
SN65MLVD201D Applications
There are a lot of Texas Instruments SN65MLVD201D Drivers/Receivers/Transceivers applications.
- Cordless telephone
- Wireless projection application for business talks
- Fiber-to-the-desktop
- Tuner
- WDM transmission
- Point-to-point networking
- Satellite communications networks
- Car alarm systems
- Car radio
- Single fiber bidirectional application
