SN65MLVD202AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 65MLVD202 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 24mA |
| Data Rate | 100Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS, Multipoint |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 25mV |
| Interface Standard | EIA-899; TIA-899 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 6 ns |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 2 V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65MLVD202AD Overview
Due to the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.In this package, the receiver is mounted in the Tube format.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply for this differential driver is 3V~3.6V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.In this wide receiver, 14 terminations are integrated for driving and receiving signals from data.Transceiver comes with 14 standard pinouts that meet the market's requirements.You can search with 65MLVD202 to get more variants of this part, since it identifies the product type, temperature, package, etc.An enhanced power dissipation driver IC with 14 pins.This ic receiver provided a 1-bit resolution capability. In the case of this receiver, a resolution of 1 bits is typically specified.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.In total, there are 1 transceivers implemented by this module isolated transceiver.
SN65MLVD202AD Features
Tube package
14 pin count
14 pins
SN65MLVD202AD Applications
There are a lot of Texas Instruments SN65MLVD202AD Drivers/Receivers/Transceivers applications.
- Copper connection network
- Indoor ad hoc meeting
- Routers
- Remote controls
- Tuner
- interconnection between computers
- Pocket PC
- Cordless telephone
- Satellite ground stations
- Precision engineering measurement
