SN65MLVD204AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65MLVD204 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 24mA |
| Nominal Supply Current | 24mA |
| Data Rate | 100Mbps |
| Output Characteristics | DIFFERENTIAL |
| Supply Type | Single |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS, Multipoint |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 6 ns |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65MLVD204AD Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tube.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.The wide receiver can be mounted on any Surface Mount-type PCB or development board.It takes 3V~3.6V from the power supply to run this differential driver.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.There are 8 pinouts available on this transceiver which are market standard.Since the part number 65MLVD204 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control driver IC featuring 8 pins.It is important to note that this ic receiver had a maximum resolution of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.This transceiver module is designed to operate from an input voltage supply of 3.3V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This IC implements 1 transceivers overall.Input voltage is set to a value of 24mA, and this integrating circuit is capable of driving LEDs with that voltage.
SN65MLVD204AD Features
Tube package
8 pin count
8 pins
SN65MLVD204AD Applications
There are a lot of Texas Instruments SN65MLVD204AD Drivers/Receivers/Transceivers applications.
- Notebook
- IPTV front end
- VoIP phones
- Transmission stations
- Bar, KTV wireless entertainment
- Wireless network systems
- interconnection between computers
- Thermal management
- Metro access rings
- Satellite communication
