SN65MLVD204ADR
| Parameters | |
|---|---|
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65MLVD204 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 24mA |
| Max Supply Current | 24mA |
| Data Rate | 100Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS, Multipoint |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 6 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
SN65MLVD204ADR Overview
Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The package of this receiver is Tape & Reel (TR).With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 3V~3.6V power supply.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.With a supply voltage range of 3.3V, this line driver ic operates efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number 65MLVD204 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.A 8-pin driver IC with enhanced power dissipation control is featured here.It is important to note that this ic receiver had a maximum resolution of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.An input voltage supply of 3.3V is required to operate the transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.This IC implements 1 transceivers overall.Input currents above 24mA could lead to mal-functions in this can transceiver.
SN65MLVD204ADR Features
Tape & Reel (TR) package
8 pin count
8 pins
SN65MLVD204ADR Applications
There are a lot of Texas Instruments SN65MLVD204ADR Drivers/Receivers/Transceivers applications.
- Wireless projection application for business talks
- Wireless transmission
- WDM transmission
- Televisions
- Mainframes, workstations or storage devices
- Thermal management
- Cable network front end
- Switches
- Vehicle
- Satellite communications networks
