SN65MLVD205AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65MLVD205 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 24mA |
| Data Rate | 100Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS, Multipoint |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 25mV |
| Interface Standard | EIA-899; TIA-899 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 6 ns |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 2 V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN65MLVD205AD Overview
Driver ICs with enhanced 14-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tube package contains this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver uses 3V~3.6V for power supply.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.14 terminations are integrated into this wide receiver for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.65MLVD205 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 14-pin driver IC.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.There is typically a resolution of 1 bits specified with this receiver.This transceiver module is designed to operate from an input voltage supply of 3.3V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.There are 1 transceivers implemented in this module isolated transceiver.
SN65MLVD205AD Features
Tube package
14 pin count
14 pins
SN65MLVD205AD Applications
There are a lot of Texas Instruments SN65MLVD205AD Drivers/Receivers/Transceivers applications.
- Structural bonding
- Fast Ethernet
- Satellite communication
- Wireless modems
- Thermal management
- Switches
- transmission relay
- Satellite ground stations
- Cordless telephone
- Bridges
