SN65MLVD207D
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 65MLVD207 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 30mA |
| Power Dissipation | 950mW |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Data Rate | 200Mbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | LVDS, Multipoint |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 25mV |
| Interface Standard | EIA-899; TIA-899 |
| Input Current | 24mA |
| Transmit Delay-Max | 2.4 ns |
| Supply Voltage1-Nom | 3.3V |
| Output Low Current-Max | 0.008A |
| Number of Receivers | 1 |
| Out Swing-Min | 0.48 V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
SN65MLVD207D Overview
Due to the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.A differential driver like this uses 3V~3.6V of power.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.With a voltage range of 3.3V, this driver IC can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.It is packaged with 14 pinouts that are market standard for this particular transceiver.Since the part number 65MLVD207 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.14-pin driver IC with improved power dissipation control.It provided a 1-bit resolution capability with this ic receiver.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.Line Driver or Receivers is a subcategory of this rf transceiver module.Additionally, there are 1 receivers included in the package.
SN65MLVD207D Features
Tube package
14 pin count
14 pins
SN65MLVD207D Applications
There are a lot of Texas Instruments SN65MLVD207D Drivers/Receivers/Transceivers applications.
- Televisions
- Routers
- Shortwave receiver
- VoIP phones
- Bar, KTV wireless entertainment
- Wireless transmission
- Car radio
- Aircraft navigation
- Single fiber bidirectional application
- Fiber optic cable connection network
