SN7406DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 7400 |
| JESD-609 Code | e4 |
| Feature | Open Collector |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IOL = 40MA @ VOL = 0.7V; IOH = 0.25MA @ VOH = 30V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | SN7406 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Channels | 6 |
| Load Capacitance | 15pF |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 23 ns |
| Family | TTL/H/L |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | - 40mA |
| Logic Type | Inverter |
| Max I(ol) | 0.04 A |
| Max Propagation Delay @ V, Max CL | 23ns @ 5V, 15pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Power Supply Current-Max (ICC) | 51mA |
| Number of Output Lines | 6 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN7406DRG4 Overview
Due to its 14-SOIC (0.154, 3.90mm Width) packaging, the part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. As a result, it works on the principle of Inverter. A voltage of 4.75V~5.25V is required for the part to function properly. Operating temperature extended to 0°C~70°C. The part is mounted in Surface Mount. Neither the high - 40mA low state of output current is - 40mA. 7400 is its series number. In total, there are 14 terminations. There are 6 features that significantly enhance the user experience. I would like to point out that this chip is part of TTL/H/L. Try searching with SN7406 if you're looking for device variants. The part body receives 14 pins. There are a number of applications for logic devices mounted with the Surface Mount pin. Datasheets for functions of 14 pins are available. It is a typical Gates logic device. A 15pF load capacitance is present in the part. The method TR has been incorporated into the package. Power supplies required for this part are specified in the datasheet as 5V. The operating supply voltage for the chip is specified as 5V volts, which corresponds to the chip voltage. Open Collector is featured in it. This part provides high quality logic output owing to its 6 channels. Check out the part's additional features, such as the following: IOL = 40MA @ VOL = 0.7V; IOH = 0.25MA @ VOH = 30V.
SN7406DRG4 Features
Inverter Logic Type
Operating Temperature: 0°C~70°C
TTL/H/L Family
Additional Feature: IOL = 40MA @ VOL = 0.7V; IOH = 0.25MA @ VOH = 30V
SN7406DRG4 Applications
There are a lot of Texas Instruments SN7406DRG4 Gates and Inverters applications.
- Car refrigerator
- Fax machine
- Air conditioner
- CD player
- Computer
- Solar street light
- Electricity for military and civilian life in areas without electricity
- Projector
- Urban rail vehicle
- Electric shaver
