SN7407NE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IOL = 40MA @ VOL = 0.7V; IOH = 0.25MA @ VOH = 30V |
| Subcategory | Gates |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 6 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 145mW |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 30 ns |
| Family | TTL/H/L |
| Logic Function | Buffer, Inverting |
| Output Characteristics | OPEN-COLLECTOR |
| Max I(ol) | 0.04 A |
| Number of Bits per Element | 1 |
| High Level Output Current | -250μA |
| Low Level Output Current | 40mA |
| Schmitt Trigger | NO |
| Number of Output Lines | 18 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN7407NE4 Overview
Logical driver uses a neat PDIP package. All of the 6 elements are put into use. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a TTL/H/L family part that is attached to this electronic component. 14 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 14 pins. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Gates. It is recommended to use a 5V power supply. It is generally sold in TUBE package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features IOL = 40MA @ VOL = 0.7V; IOH = 0.25MA @ VOH = 30V to better serve the need. Voltage buffer is capable of operating under temperature as low as 0°C. Digital buffer should operate with ambient temperature no higher than 70°C. Buffer driver outputs 40mA to its low level. In high level output mode, the electronic parts may conduct -250μA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V. Wireless transceiver is able to output 18 lines.
SN7407NE4 Features
Gates
IOL = 40MA @ VOL = 0.7V; IOH = 0.25MA @ VOH = 30V
High Level Output: 40mA
Low Level Output: -250μA
SN7407NE4 Applications
There are a lot of Texas Instruments SN7407NE4 Buffers & Transceivers applications.
- 1x/2x Fiber Channel
- Data center
- Long-distance fiber optic network applications
- Point-to-point networking
- Single fiber bidirectional application
- Wireless HD Photography
- Cable network front end
- Precision geodetic measurement
- Cell phones
- Low power, low voltage systems
