SN74107N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 7400 |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MASTER SLAVE OPERATION |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | SN74107 |
| Function | Master Reset |
| Output Type | Differential |
| Max Output Current | 16mA |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 16mA |
| Clock Frequency | 20MHz |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 16 ns |
| Family | TTL/H/L |
| Logic Function | Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 20mA |
| Current - Output High, Low | 400μA 16mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74107N Overview
It is packaged in the way of 14-DIP (0.300, 7.62mm). Package Tubeembeds it. T flip flop is configured with an output of Differential. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The supply voltage is set to 4.75V~5.25V. Temperature is set to 0°C~70°C TA. The type of this D latch is JK Type. In terms of FPGAs, it belongs to the 7400 series. It should not exceed 20MHzin its output frequency. As a result, it consumes 20mA quiescent current and is not affected by external forces. 14terminations have occurred. JK flip flop belongs to SN74107 family. It is powered by a voltage of 5V . A device of this type belongs to the family of TTL/H/L. This electronic part is mounted in the way of Through Hole. 14pins are included in its design. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. Despite its superior flexibility, it relies on 2 circuits to achieve it. There are 5V power supplies attached to it. The supply voltage should be maintained at 5V for high efficiency. With an output current of 16mA, this device offers maximum design flexibility. Additionally, you may refer to the additional MASTER SLAVE OPERATION of the electronic flip flop.
SN74107N Features
Tube package
7400 series
14 pins
5V power supplies
SN74107N Applications
There are a lot of Texas Instruments SN74107N Flip Flops applications.
- Bounce elimination switch
- Registers
- Latch
- Communications
- Consumer
- Event Detectors
- Shift Registers
- QML qualified product
- Power down protection
- ATE
