SN74ABT125D
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Propagation Delay | 4.6 ns |
| Quiescent Current | 30mA |
| Turn On Delay Time | 6.8 ns |
| Family | ABT |
| Logic Function | Buffer, Inverting |
| Number of Inputs | 4 |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 1 |
| Control Type | ENABLE LOW |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Frequency | 1.740926MHz |
| Base Part Number | 74ABT125 |
| Pin Count | 14 |
| Output Type | 3-State |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
SN74ABT125D Overview
Logical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74ABT series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the ABT family are used in this part. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74ABT125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 30mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 4 channels for high quality communication. Digital buffer is characterized to have 4 inputs. The typical output current of the logical driver is measured 64mA.
SN74ABT125D Features
Bus Driver/Transceivers
SN74ABT125D Applications
There are a lot of Texas Instruments SN74ABT125D Buffers & Transceivers applications.
- Desktop radio
- Low power, low voltage systems
- Sensor reporting
- Wireless multimedia center in smart home
- Carrier phase observations
- Cell phones
- Indoor ad hoc meeting
- Wireless teaching
- Point-to-point networking
- Cable network front end
