SN74ABT126PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 30mA |
| Turn On Delay Time | 6.8 ns |
| Family | ABT |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 6.3 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | ENABLE HIGH |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT126PWRG4 Overview
Logical driver uses a neat TSSOP package. Tape and Reel external packaging. All of the 4 elements are put into use. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a ABT family part that is attached to this electronic component. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE HIGH control technology. In quiescent state, the electronic part uses 30mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS DRIVER logic IC.
SN74ABT126PWRG4 Features
Bus Driver/Transceivers
High Level Output: 64mA
Low Level Output: -32mA
BUS DRIVER Logic IC
SN74ABT126PWRG4 Applications
There are a lot of Texas Instruments SN74ABT126PWRG4 Buffers & Transceivers applications.
- Metro access rings
- Wireless projection application for conferences and business talks
- Indoor ad hoc meeting
- Digital systems
- Data center
- Clock radio
- LAN, SAN, WAN (local, storage, work area networks)
- Gigabit Ethernet
- Lamps
- Radio transmission
