SN74ABT16244ADL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TYP VOLP < 1V @ VCC = 5V, TA = 25 DEG C |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ABT16244 |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 16 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 4 |
| Propagation Delay | 3.7 ns |
| Quiescent Current | 32mA |
| Turn On Delay Time | 4.8 ns |
| Family | ABT |
| Logic Function | AND, Buffer, Inverting |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Buffer, Non-Inverting |
| Control Type | ENABLE LOW |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT16244ADL Overview
Logical driver uses a neat 48-BSSOP (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). All of the 4 elements are put into use. Digital buffer is one of the 74ABT series devices. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the ABT family are used in this part. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. You can search "74ABT16244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 32mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 4 bits are included within the electrical component. Logical driver features TYP VOLP < 1V @ VCC = 5V, TA = 25 DEG C to better serve the need. It is sufficient to make 16 outputs. The fundamental operation of logical driver is based on 16 circuits. The typical output current of the logical driver is measured 64mA.
SN74ABT16244ADL Features
Bus Driver/Transceivers
TYP VOLP < 1V @ VCC = 5V, TA = 25 DEG C
SN74ABT16244ADL Applications
There are a lot of Texas Instruments SN74ABT16244ADL Buffers & Transceivers applications.
- Remote controls
- Fiber optic cable connection network
- Clock radio
- VoIP phones
- Wireless showroom
- Carrier phase observations
- Data center
- Laser diode bonding
- IP cameras
- Interconnection between switches and computers
